Defender PHOENIX1 Manual de instrucciones descargar pdf (Pagina 21)

17PHOENIX1

Audio Issues/No Audio 1. Ensurethevolumeisturneduponthemonitor(presstheV+buttonto

increase volume)

2. Make sure that the sound is within microphone range

3. If the unit emits a loud screeching sound (feedback) try moving the

camera away from the monitor or angle the monitor dierently

LCD monitor beeping and LEDs

lighting up frequently

1. The audio sensitivity is likely turned up all the way, making the

microphone very sensitive to sounds occurring in your monitoring area.

2. Adjustmicrophonesensitivitybyusingthe dial on the side of

the LCD monitor.

3. Pulling the dial down causes the camera to be less sensitive towards

sound and will only alert you in instances of very loud noises. Turning

the dial all the way down will completely disable the audio alarm.

LCD monitor not beeping despite

loud sound occurring in your

monitoring area

1. The audio sensitivity is likely turned down, or the alarm feature is

disabled.

2. Adjustmicrophonesensitivitybyusingthe[Graphics:insertaudio

sensitivity dial graphic] dial on the side of the LCD monitor.

3. Pushing the dial up causes the camera to become more sensitive to

sound and prone to more frequent alerts on the monitor.

Video/Audio not displaying on

TV screen

1. Ensure cables are plugged in their proper places: the RCA cables should

beintheTV’sinputjacksandtheadaptercableisintheAVoutonthe

side of the LCD monitor

2. Make sure the TV is on the VIDEO input channel

PHOENIX1

1 2 ... 16 17 18 19 20 21 22 23 24 25 26

Sin comentarios

Defender PHOENIX1 Manual de instrucciones Pagina 21